All Collections
Deuta Controls EnoPuck CO2
Deuta Controls EnoPuck CO2

This document describes the connection of AL-602-01-868 sensor to Spaceti Platform.

Written by Maksym Huk
Updated over a week ago

Deuta Controls EnoPuck CO2 transmits messages over EnOcean network. To install the sensor through Map Editor, you need to input the EnOcean Unique Radio Identifier (EURID) as a Serial number of the sensor.

In case of the EnoPuck CO2 sensor this EURID is written on the device.

In this particular case the EURID of the sensor is 0x042107C5. However, the symbols 0x are unnecessary, so the correct value to input to the Map Editor is 042107C5.

Did this answer your question?