This uninstallation manual applies to all Spaceti office sensors with part numbers starting with SCP, SRP, and SC2.
Tools:
TL1 | undeploy tool | undep002 |
Img 1 - Undeploy tool
Unistallation process
Insert the tool TL1 into the undeploy hole
Img 2 - Undeploy tool usage
Press the tool TL1 into the undeploy hole and apply pressure against the spring inside the sensor. Feel the resistance of the spring and continue pressing until it reaches the end.
Rotate the sensor counterclockwise.
Img 3 - push and rotate
Unbuckle the sensor from the platform while keeping the platform attached to the chosen spot.